C613-50066-01 REV A
Command Reference for IE200 Series Industrial Managed PoE+ Switches
1291
AlliedWare Plus™ Operating System - Version 5.4.5I-0.x
DHCP
FOR
IP
V
6 (DHCP
V
6) C
OMMANDS
SHOW
IPV
6
DHCP
INTERFACE
show ipv6 dhcp interface
Overview
Use this command in User Exec or Privileged Exec mode to display DHCPv6
information for a specified interface, or all interfaces when entered without the
interface parameter.
For information on filtering and saving command output, see “Controlling “show”
Command Output” in the
“Getting Started with AlliedWare Plus” Feature Overview
and Configuration Guide
.
Syntax
show ipv6 dhcp interface [<
interface-name
>]
Mode
User Exec and Privileged Exec
Example
To display DHCPv6 information for all interfaces DHCPv6 is configured on, use the
command:
awplus#
show ipv6 dhcp interface
Output
Figure 39-3:
Example output from the
show ipv6 dhcp interface
command
Parameter
Description
<interface-name>
Optional. Specify the name of the interface to show DHCPv6
information about. Omit this optional parameter to display
DHCPv6 information for all interfaces DHCPv6 is configured on.
awplus# show ipv6 dhcp interface
vlan1 is in client mode
Address 1001::3c0:1
preferred lifetime 9000, valid lifetime 5000
starts at 20 Jan 2012 09:21:35
expires at 20 Jan 2012 10:25:32
Table 39-2: Parameters in the output of the
show counter dhcp-client
command
Parameter
Description
<interface> is in
client mode
Displays that the specified interface is in client
mode.
Address
Displays the address of the DHCPv6 server on the
interface.
Preference
Displays the preference value for the DHCPv6
server.
