AT-FS705LE Installation Guide
13
6. Attach the data cables to the switch ports. Do
not use a crossover cable to connect
workstations or servers to ports 1 through 5.
Do not use a crossover cable to connect
another switch or hub to the Uplink port.
Note
You can use either Port 5 or the Uplink
port, but you cannot use both
simultaneously.
7. Power ON the end-nodes.
8. Check that the LINK/ACT LEDs for each port
on the switch are green. If the LEDs are OFF,
refer to “Troubleshooting” on page 16 for
instructions.
The switch is now ready for use.
Summary of Contents for AT-FS705LE
Page 1: ...AT FS705LE 10 100Base Ethernet Switch Installation Guide PN 613 50138 00 Rev C...
Page 6: ......
Page 14: ......
