14
Installing the Switch in a Rack
To install the Ethernet switch in a standard 19-inch rack, perform the
following procedure:
1.
Remove all components from the shipping package and store the
packaging material in a safe location.
2.
Attach the brackets to each side of the switch using the screws that came
with the switch package, as shown in Figure 1.
Figure 1
Attaching Brackets for Rack Mounting
3.
Mount the switch in the rack using standard screws (not provided).
Caution
Air vents must not be blocked and must have free access to the room
ambient air for cooling.
10
4.
Apply AC power to the switch by plugging the power cord into the AC
power connector on the back panel of the unit and plugging the other end
into a power outlet.
Warning
The power cord is used as a disconnection device. To de-energize
equipment, disconnect the power cord.
7