Chapter 2: Installing the Hardware
29
Figure 16. Installing Power Adapter on the Wall
10. Install the power adapter unit on the wall with the four screws using a
Phillips-head screw driver as shown in Figure 16 on page 29.
11. Go to “Installing the Clamp to the Power Cord and Plug the Power
Installing the
Clamp to the
Power Cord and
Plug the Power
Adapter
When the power adapter is installed on a wall, install the clamp and
connect to the cable tie on the bracket to prevent the power cord
connection from coming loose.
To install the clamp to the power cord and plug in the power adapter,
perform the following procedure:
1. Provide the following items:
Power cord to the power outlet (included in the shipping box)
Clamp (included in the shipping box)
Phillips-head screwdriver (not included)
