AT-7101GHTm PoE Injector Installation Guide
18
Choosing a Site for the PoE Injector
Observe these guidelines when planning the installation of the PoE
injector:
If you plan to install the PoE injector on a table, the table should be
level and stable.
The power outlet should be located near the PoE injector and be
easily accessible.
The site should allow for easy access to the ports on the front of
the PoE injector, so that you can easily connect and disconnect
cables, and view the port LEDs.
The site should not expose the PoE injector to moisture or water.
The site should be a dust-free environment.
To install the PoE injector on a desktop or tabletop, the PoE
injector should be installed with the top panel looking up and the
front panel on the side. See Figure 4.
Figure 4. Installation Orientation on a Desktop or Tabletop
The PoE injector should be installed level on a wall. The front
panel can be facing up, down, left or right. Figure 5 shows the PoE
injector installed level with the front panel facing to the left.
Figure 5. Installation Orientations on a Wall
