Chapter 2: Installing the Hardware
19
Unpacking the PoE Injector and Power Adapter
To unpack the PoE injector and power adapter , perform the following
procedure:
1. Remove all components from the shipping boxes.
Note
Store the packaging material in a safe location. You must use the
original shipping material if you need to return the unit to Allied
Telesis.
2. Verify that all components listed in Table 2 and Table 3 on page 20 are
included in your shipping boxes:
Table 2. Components for the PoE Injector
Name
Component
PoE injector
Wall-mount bracket
Screws (M3x5mm)
x 4 for attaching
brackets
