manualshive.com logo in svg

Allied Telesis AT-2931SX, User Manual, Page: 46 / 82

Share
Download
Allied Telesis AT-2931SX User Manual Download Page 46

Chapter 3: Installing BACS on Windows 2000 and Windows 2003 Systems

46

Uninstalling the AT-2931SX BASP

To uninstall the AT-2931SX Broadcom Advanced Server Program Driver 
Properties (BASP), perform the following procedure:

1. Open the Control Panel

2. Double-click the 

Add or Remove Programs

 button.

3. Select Broadcom Management Programs and click 

Change/Remove

.

4. Click 

Next

. 

The InstallShield Wizard screen appears.

5. Click the 

Modify

 radio button and click 

Next

.

6. The Select Components screen appears. 

Four install/uninstall selections are available from this screen. 

7. Deselect the 

BASP

 checkbox, then click 

Next

.

8. A question box appears indicating that removing BASP will uninstall 

your configured adapter team/VLAN. Click 

Yes

 to continue.

9. When complete, an information screen notifies you that the files were 

successfully uninstalled. 

10. Click 

OK

 to complete the uninstall. 

Summary of Contents for AT-2931SX



















































































Reviews:

No comments