Advanced Control Suite for the AT-2931SX Adapter User’s Guide
17
Information
Provided by the
BACS
Applications
The
AT-2931SX Broadcom Advanced Control Suite
lists all of the
network adapters in your computer and provides the following information,
if available, about each device. See Table 2.
BACS Features
The following features are accessible from the BACS application:
“Vital Sign” on page 23. Provides at-a-glance status reports on all of
the LAN devices in your computer.
“Resources” on page 26. Displays the system resources of the
selected device.
“Hardware” on page 27. Displays the hardware information (the ASIC
version and the firmware version) for the selected device.
“Network Test” on page 28. Confirms network connectivity to a remote
station. The network test sends ICMP packets to remote systems and
waits for a response. If a gateway is configured, the test automatically
sends packets to that system. If a gateway is not configured or if the
gateway is unreachable, the test prompts you for a destination IP
address.
“Diagnostics” on page 28. Performs comprehensive diagnostics on
Broadcom network adapters.
“Statistics” on page 30. Provides detailed performance statistics on
each selected device.
“BASP Statistics” on page 33. Configures the load balance and failover
by grouping multiple network adapters.
Table 2. BACS Application Information
Driver Status
Driver Version
Frames Rx OK
MAC Address
Driver Date
Team Name
Link Status
Firmware Version
Team Type
IP Address
ASIC Version
VLAN Name
Memory Address
Bus Type
VLAN ID
Physical Address
Bus No.
BASP Tx Packet
Speed
Device No.
BASP Tx Packet
Discarded
Duplex Function
No.
BASP Tx Packet
Queried
Slot No.
Interrupt Request BASP
Rx
Packet
Driver Name
Frames Tx OK
BASP Rx Packet
Discarded