Hardware Reference
35
C613-03031-01 REV E
The MAC slot can accommodate any one of the following MACs:
•
AT-AR010 EMAC, Encryption MAC.
•
AT-AR011 ECMAC, Compression/Encryption MAC
•
AT-AR011 V2 ECMAC, Compression/Encryption MAC.
•
AT-AR012 CMAC, Compression MAC.
MACs should only be installed by authorised service personnel. Unauthorised
opening of the router lid may cause danger of injury from electric shock, damage
to the router, and invalidation of the product warranty.
Front and rear panels of the AT-AR410 router with a PIC installed are shown in
Figure 15 on page 35.
Figure 15: Front and rear panels of the AT-AR410 Series router.
LEDs and what they mean
Functions of the AR410’s LEDs are shown in Table 16 on page 36. Additional
LEDs may be present if a PIC is installed. Functions of PIC LEDs are described
in the
Port Interface Card Hardware Reference
.
POWER
SYN
Tx
Rx
AC Power Switch
AC Power Inlet
Console Port
10/100 Switch Ports
PIC Bay (with optional
AT-AR023 SYN PIC)
CONSOLE RS-232
PIC BAY0
3X
ASYN0
2X
1X
4
POWER
10BASE-T/100BASE-TX SWITCH PORTS
X PC
= HUB
ETH0
ETH 0
AR410
Branch Office Router
POWER
SYSTEM
STATUS
ENABLED
1
2
3
4
LINK/ACT
FULL DUP
100M
LINK/ACT
FULL DUP
100M
10BASE-T/100BASE-TX SWITCH PORTS
ETH0
PIC BAY0
