Patch 86222-10 For Rapier Switches and AR800 Series Modular Switching Routers
13
Patch 86222-10 for Software Release 2.2.2
C613-10319-00 REV J
Repeated addition and deletion of an address with the VALID parameter set
to or from an IPV6 interface caused a fatal error. This issue has been
corrected. The VALID parameter specifies the life of the address, and
defaults to INFINITE. The address is deleted when the lifetime expires. The
PREF parameter specifies the time that the address is the preferred address
of the interface, and defaults to INFINITE. PREF must be less than or equal
to VALID. IPV6 now checks and ensures that if either PREF or VALID is
specified, PREF is less than or equal to VALID. When an address is deleted
the timers are now correctly cleared.
IP sometimes passed the wrong port number to PIM, causing PIM to
process the wrong port number in its routing table. This issued has been
resolved.
Availability
Patches can be downloaded from the Software Updates area of the Allied
Telesyn web site at
www.alliedtelesyn.co.nz/support/updates/patches.html
. A
licence or password is not required to use a patch.
PCR: 01119
Module: IPV6
Network affecting: No
PCR: 01120
Module: IPG
Network affecting: No
