Allied Telesis 2911 Series User Manual Download Page 54

Page: 54 / 122

Chapter 3: Modifying Advanced Properties

IPv4 Checksum Offload

The IPv4 Checksum Offload feature allows the adapter to verify the IPv4
checksum to enhance IPv4 receive and transmit performance and reduce
CPU utilization.

To enable or disable the IPv4 Checksum Offload feature, do the following:

1. Access the Advanced Properties.

See “Accessing Advanced Properties” on page 43.

2. Select

IPv4 Checksum Offload

in the Property box.

The IPv4 Checksum Offload page is displayed as shown in Figure 24.

Figure 24. IPv4 Checksum Offload Page

3. Select one of the following options:



Rx & Tx Enabled —

The adapter verifies IPv4 Checksum for both

receiving and transmitting packets. This is the default setting.



Disabled —

The CPU verifies IPv4 checksum.



Rx Enabled —

The adapter verifies IPv4 Checksum only for

receiving packets.



Tx Enabled —

The adapter verifies IPv4 Checksum only for

transmitting packets.

4. Click

Summary of Contents for 2911 Series



























































































































Search results

Summary of Contents for 2911 Series

Reviews:

Related manuals for 2911 Series

Brands by name

Popular brands

Allied Telesis 2911 Series, User Manual

Search results

Summary of Contents for 2911 Series

Reviews:

Related manuals for 2911 Series

Brands by name

Popular brands