rev 1 7/2016
8
Motors / Props
M2 (CCW)
M1 (CW)
M4 (CW)
M3 (CCW)
The motor and propeller direction and numbering is
critical for the flight of the AR25. Each set of ESC/
Motor solder tabs are labeled on the side plates.
Because each ESC is fully configurable through the
flight controller via USB, we recommend not
worrying about the order in which the ESC output
and motor leads are wired into the plates because
we can change it in firmware faster than soldering.
NOTE: However, DO pay attention to ESC input wire
+/- wiring!
When replacing motors, props, and ESCs, please
make note of the proper direction and motor
number position.
Summary of Contents for AR25
Page 1: ...rev 1 7 2016 1 ...
