rev 1 7/2016
18
battery
Specifications
The AR25 battery has been specifically designed for
the internal battery bay and features extended
battery discharge leads and a genuine XT60
connector to reach the power input on the left side
plate.
To insert the battery the battery leads must face to
the rear and bottom of the frame. First pass the XT60
connector through the slot to exit the rear of the
composite frame, then tuck the balance connector
into the slot. Tilt the rear of the battery into the bay
and then rotate the front of the battery into position.
Secure the battery by lightly separating the plates
while inserting and rotating the battery plate tabs
into the slots in the plates until it “snaps” into place.
Internal Battery Bay Dimensions: 111mm x 30mm x 35mm
Standard AR25 battery: 4S 1P, 14.8v, 1800mAh, 60C, XT60, 210g
Standard battery dimensions: 105mm x 27mm x 35mm
Standard battery lead length: 150mm
Charge Rate: 1-2C (max 5C)
Summary of Contents for AR25
Page 1: ...rev 1 7 2016 1 ...