manualshive.com logo in svg

Allice Messtechnik R&S ZND, User Manual, Page: 938 / 1252

Share
Download
Allice Messtechnik R&S ZND User Manual Download Page 938

Command reference

R&S

®

ZND

938

User Manual 1173.9557.02 ─ 61

See 

Chapter 4.5.5.6, "Multiple port assignments"

, 

on page 173 for background infor-

mation.

Note

:

Use 

[SENSe<Ch>:]CORRection:COLLect:AUTO:ASSignment:COUNt?

 to get the

number of port assignments of the "current" calibration.

Suffix: 

<Ch>

.

Channel number

Example: 

See 

Chapter 8.2.5.2, "MultiCal (with calibration unit)"

,

on page 1169

Usage: 

Query only

[SENSe<Ch>:]CORRection:COLLect:AUTO:ASSignment:COUNt?

Returns the number of port assignments of the "current" calibration, i.e. the calibration
last created using 

[SENSe<Ch>:]CORRection:COLLect:AUTO:CONFigure

.

This is particulary useful if the default port assignments were established using

[SENSe<Ch>:]CORRection:COLLect:AUTO:ASSignment:DEFine:DEFault

.

See 

Chapter 4.5.5.6, "Multiple port assignments"

, 

on page 173 for background infor-

mation.

Note

:

In MultiCal scenarios, use 

[SENSe<Ch>:]CORRection:COLLect:AUTO:

ASSignment:ALL:COUNt?

 to get the number of port assignments of all calibrations.

Suffix: 

<Ch>

.

Channel number

Example: 

See 

[SENSe<Ch>:]CORRection:COLLect:AUTO:

ASSignment<Asg>:DEFine

 

on page 938

Usage: 

Query only

[SENSe<Ch>:]CORRection:COLLect:AUTO:ASSignment<Asg>:DEFine

<TestPort1>, <CalUnitPort1>[, <TestPort2>]...

Manually defines port assignment no. <Asg> for channel no. <Ch>.

With manual configuration a non-minimal set of port assignments can be created,
which may increase measurement accuracy. On the other hand, it is up to the user to
ensure that the created set of port assignments is complete and valid for the chosen
calibration type (see 

[SENSe<Ch>:]CORRection:COLLect:AUTO:CONFigure

).

Note

 that during the corresponding calibration sweep the R&S

 

ZND expects the physi-

cal port connections to be established exactly as defined by the port pairs.

Use

●

[SENSe<Ch>:]CORRection:COLLect:AUTO:ASSignment<Asg>:DEFine:
TPORt

 command to take advantage of auto-detection of port connections.

SCPI command reference

www.allice.de

Allice Messtechnik GmbH

Summary of Contents for R&S ZND





































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments