38
2.2 Carrying of unit
Handling rope should at least be able to bear 3
ti
mes the unit weight, and must go through the handling
holes shown in following pictur
es. To protect the unit while handling, insert protective pads between
rope and unit.
For ALLWH200R410 before
lift
ing, open the front and rear co
ve
r of the lower unit and reset it
a
ft
er
installa
ti
on. The li
ft
ing angle of the rope should larger than 60°.
For ALLWH420 and ALLWH800R410 , the distance between the hood and air outlet meshes should
be more than 1 meter, and ensure that the hood has enough strength as well as reliability in handling
process. Unit gradient (
α
) should be less than 3°. Handle with care,
avoid bumping or dragging the unit.
Do not stand in handling opera
ti
ng radius.
Figure 3-2.2: Lifting of
$//:+5
Figure 3-2.3: Lifting of
$//:+5
MCAC-HTSM-201801 Alliance R410A Direct Heating Type HPWH 50Hz Technical Manual
