© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
19
1800001
Maintenance
General Maintenance
3
IMPORTANT: The maintenance should be done
according to the maintenance plan. The
manufacture is not responsible for accidents or
defects due to bad maintenace or use of spare parts
not delivered from factory.
The possible risks of bad maintenance are:
●
Quick wear of bearings and gears by insufficient
greasing.
●
Heating of the bearings with insufficient greasing
can lead to fire.
●
If safety devices are not checked daily, it can lead
to severe accidents.
●
Worn or missing feed bands can cause a danger
for trapped fingers.
●
Quick wear of bearings and gears by insufficient
greasing.
●
Waiting too long to renew the padding can
damage the beds.
Daily:
•
2 to 4 times a day pass a wax cloth through ironer.
•
Check condition of padding.
•
Dust the machine.
Every Three Months:
•
Clean ventilation caps of drive reduction motor and
suction fan.
•
Grease bearings with 1-2 pumps of high temperature
grease.
Every Six Months:
Check chain tension of feed bands.
Yearly:
Change reduction drive roll oil.
Every 2 Years:
Drain ironing bed oil.
Every 5 Years:
Drain and replace hydraulic pump oil.
Other:
If scale occurs at entrance of beds, clean beds.
Oil Change Maintenance
Reduction Drive Roll
Ironing Bed
Hydraulic Pump
Oil Type
GOYA 220
TEXATHERM HT22
SHELL TELLUS S 68
Maintenance
First drain after 6
months then every year
Every 2 years
Drain every 5 years
Oil Volume
1.2 liter (0.3 gallons)
Gas Models
30 liter (8 gallons)
Electric Models
90 liters (24 gallons)
2.5 liter (0.7 gallons)
Table 8
Summary of Contents for UL15F069
Page 2: ......
