Alliance Laundry Systems SWD447C, Installation & Operation Manual

Page: 67 / 144

Maintenance
65
801539 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Before You Call for Service
You may save time and money by checking the
following:
If the Washer:
If the Dryer:
Won’t
Fill
Won’t
Start
Won’t
Tumble
Won’t
Spin
Won’t
Drain
Possible Reason
–
Do This to Correct
•
Be sure power cord is plugged all the way into the electrical
outlet.
• • • • Close the loading door tightly.
• • • •
Check the laundry room fuse or circuit breaker.
• Turn on the hot and cold water faucets.
•
Clean the screens in the water mixing valve and the filter
screens in the fill hoses.
• • Are controls properly set?
• •
Broken drive belt. Call the service person.
• • Foreign object trap clogged. Clean foreign object trap.
• Press the START keypad.
• Insert coin(s) or card.
Does
Not
Start
Does
Not
Heat
Does Not Dry
Clothes
Satisfactorily
Possible Reason
–
Do This to Correct
• Insert coin(s) or card.
•
Be sure the cord is plugged all the way into the electrical outlet.
• Close the loading door.
• Make sure the controls are in a HEAT setting.
• Press the START keypad.
• •
Has the laundry room fuse blown or become loosened, or is a circuit breaker
OFF? The dryer itself does NOT have an electrical fuse.
• Has the motor overload protector cycled? Wait 10 minutes and try again.
•
Gas Dryers Only – Check to see if the gas valve in the dryer (behind the lower
front panel) and the main gas line valve are turned on.
• Clean the lint filter.
• •
Check the exhaust duct to the outside to see if it is kinked, blocked or needs
cleaning.
• •
Check the weather hood to make sure the flappers move freely, are not pushed
in or have not been blocked.
• Is the load too small? Small loads may not tumble properly or dry evenly.