Alliance Laundry Systems SWD447C, Installation & Operation Manual

Page: 52 / 144

Operation
801539
50 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Step 3: Add Laundry Supplies
Open dispenser drawer. Measure and add low sudsing
detergent (1), bleach (2) and fabric softener (3) to the
dispenser drawer. Refer to Figure 45. Close dispenser
drawer.
IMPORTANT: If using detergents made for
topload washers, avoid oversudsing by using 1/2 of
the recommended amount.
Figure 45
Step 4: Determine Proper Controls for
Washer
The direction of the arrow indicates which controls are
for the washer.
Figure 46
Step 5: Set Fabric Selector and Wash
Temperature
Push keypad for NORMAL/HOT, NORMAL/
WARM, PERM PRESS/WARM or DELICATES/
COLD cycle. Light indicates selection.
NOTE: Changes can be made to Fabric Selector
setting up until the first fill is complete.
Figure 47
SWD753N
1 Detergent
2 Bleach
3 Fabric Softener
Dispenser drawer requires a special tool for
removal. Contact a service person if
removal is necessary.
W236
CAUTION
1
3
2
DRY1930N
FLW1920N
DRY1930N
FLW1920N