background image

• Always read and follow manufacturer’s instructions on pack-

ages of laundry and cleaning aids. To reduce the risk of poison-
ing or chemical burns, keep them out of the reach of children at
all times (preferably in a locked cabinet). Heed all warnings or
precautions.

• Do not use fabric softeners or products to eliminate static un-

less recommended by the manufacturer of the fabric softener
or product.

• Loading door MUST BE CLOSED any time the washer is to fill,

tumble or spin. DO NOT bypass the loading door switch by per-
mitting the washer to operate with the loading door open.

• Be sure water connections have a shut-off valve and that fill

hose connections are tight. CLOSE the shut-off valves at the
end of each wash day.

• Keep your washer in good condition. Bumping or dropping the

washer can damage safety features. If this occurs, have your
washer checked by a qualified service person.

• Do not repair or replace any part of the washer, or attempt any

servicing unless specifically recommended in the user-mainte-
nance instructions or in published user-repair instructions that
you understand and have the skills to carry out. ALWAYS dis-
connect the washer from electrical supply before attempting
any service.

• Disconnect the power cord by grasping the plug, not the cord. If

the supply cord is damaged, it must be replaced by the manu-
facturer, its service agent or similarly qualified persons in order
to avoid a hazard.

• Before the washer is removed from service or discarded, re-

move the lid or door to the washing compartment.

• Failure to install, maintain, and/or operate this washer accord-

ing to the manufacturer’s instructions may result in conditions
which can produce bodily injury and/or property damage.

NOTE: The WARNING and IMPORTANT SAFETY IN-

STRUCTIONS appearing in this manual are not meant to

cover all possible conditions and situations that may oc-

cur. Common sense, caution and care must be exercised

when installing, maintaining, or operating the washer.

Always contact your dealer, distributor, service agent or the man-
ufacturer about any problems or conditions you do not under-
stand.

Safety Information

  6

©

 Copyright, Alliance Laundry Systems LLC - DO NOT COPY or TRANSMIT

  Part No. 804648R3

Summary of Contents for Speed Queen AFNE9RSP





























Reviews: