Rinse & Spin
Use to quickly rinse items. The rinse is followed by a high spin.
Spin
Use this cycle to extract water from wet items. The cycle uses the
high spin.
Selections
The following selections can be used to modify the currently chosen
cycle. The default selections will be lit after choosing a cycle.
Temp
Press the Temp keypad to change the cycle’s wash water tempera-
ture from the default selection to Cold, Cool, Warm, or Hot.
WARNING
Window may be hot in the Hot Wash Cycle.
W326
Spin Speed
The Spin Speed selection will change the cycle’s final spin from the
default speed to No Spin, Low, Medium, or High spin.
Soil Level
Changing the Soil Level keypad will add more wash time to the cycle.
Choose Light, Medium, Heavy or Max according to the amount of
soil in the laundry load.
Options
The following options can be used to modify the currently chosen
cycle, signal volume and control lock.
Soak
The Soak option adds a 30 minute soak to the beginning of the cy-
cle. During the soak period, the wash basket will rotate every few
minutes to tumble the laundry.
Pre-Wash
The Pre-Wash option adds a second wash to the selected cycle.
Second Rinse
This Option will provide an additional rinse to the selected cycle.
The water temperature will be cold.
Third Rinse
The Third Rinse Option provides two additional rinses. It is useful
for detergent sensitive skin. The water temperature will be cold.
Delay Start
Pressing the Delay Start Option will allow the cycle to begin up to
24 hours after pressing the keypad. Pressing it once will delay the
cycle by one hour and 1h will show on the control’s display. Press
the Delay Start keypad again to increase the time by one hour each
press. Press the Start/Pause keypad to begin the countdown.
While setting the Delay Start Option, the cycle time and the Delay
Start keypad light will flash (1 second on/off).
After the Delay Start Option is started, the Delay Start keypad
light will flash (1 second on/off).
Signal
Pressing the Signal keypad will change the end of cycle signal vol-
ume. There are four settings: Off, Low, Medium, High.
Control Lock (Secure keypad)
Pressing and holding the Signal keypad for three seconds will turn
on the Control Lock. The Control Lock status light will be lit. While
Control Lock is on, no other keypad presses are allowed. Press and
hold the Signal keypad again to turn the option off.
Status
The Status lights are lit during the cycle to show what part of the
cycle is running.
Wash
The Wash status light is lit
during the wash portion of the
cycle including Pre-Wash and
Soak, if selected.
Rinse
The Rinse status light is lit
during the rinse portions of
the cycle including Second
Rinse and Third Rinse, if selec-
ted.
Spin
The Spin status light is lit
during the final spin portion of
the cycle.
Door Lock
The Door Lock status light is
lit whenever the door is locked.
The door cannot be opened
while it is lit.
While the door is locking, the door lock status light flashes (1 sec-
ond on/1 second off). While unlocking, the door lock status light
stays lit and the cycle time flashes (1 second on/1 second off).
Control Panel
10
©
Copyright, Alliance Laundry Systems LLC - DO NOT COPY or TRANSMIT
Part No. 804648R3
