Alliance Laundry Systems SG025D, Original Instructions Manual

Page: 32 / 64

Manual Programming
Refer to Menu Navigation for an overview of menus.
System Menu
TMB1885R_SVG
Figure 31
The System Menu allows the user to access RAPID ADVANCE
(
Rapid Advance Activation ), CANCEL CYCLE ( Cancel Cycle ),
ERROR PRESENT ( Clear Active Error ), PARTIAL VEND
PRESENT ( Clear Partial Vend ), ADVANCED INFO ( Ad-
vanced Info Menu ), SETTINGS ( Settings Menu ), AUDIT DATA
( Audit Data Menu ), DIAGNOSTICS ( Diagnostics Menu ),
SERVICE SCHEDULE ( Service Schedule Menu ) and RESET
( Reset Menu ).
To access the System Menu, press and hold for 3 seconds on the
center of the menu header from the display with the service door
open and, for coin models, the coin vault closed .
indicates there is more content than fits on the screen. Swipe up
or down to see all content.
Touch EXIT to return to the previous screen.
NOTE: When selecting RAPID ADVANCE, DIAGNOS-
TICS, RESET or SETTINGS, the
Passcode Menu will ap-
pear first, if programmed to be passcode protected.
Passcode Menu
CHM2098R_SVG
Figure 32
The owner can program the control to require users to enter a
passcode to access sections of the
System Menu . The control dis-
plays the Passcode Menu when entering RAPID ADVANCE
(
Rapid Advance Activation ), SETTINGS ( Settings Menu ), DI-
AGNOSTICS ( Diagnostics Menu ) or RESET ( Reset Menu ) sub-
menus from the System Menu .
1. Enter the four (4) digit passcode by touching the numbers on
the display.
2. Touch SUBMIT on the touchscreen to access the selected Sys-
tem Menu sub-menu.
Save Changes Menu
CHM2099R_SVG
Figure 33
After modifications are complete, touch EXIT to access the Save
Changes Menu.
• Touch SAVE AND EXIT to save changes and exit the current
menu.
• Touch EXIT WITHOUT SAVING to discard changes and exit
the current menu.
Manual Programming
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
32 Part No. 70600001ENR6