Alliance Laundry Systems PD3JGBGS403UG01, Programming

Page: 9 / 40

Control Identification
SELECT CYCLE Pads
(Refer to Figure 1 )
SELECT CYCLE pads are used to select the specific dryer cycle
and temperature. These pads include HIGH TEMP, MED TEMP,
LOW TEMP and DELICATES. The selection of one of these cy-
cles will light up the corresponding LED. The factory default cy-
cle is MED TEMP.
START Pad
(Refer to Figure 1 )
The START pad is used to start the dryer after the full vend price
has been satisfied and the dryer door is closed.
Both the START pad and the SELECT CYCLE pads are used in
various combinations for programming cycles, retrieving audit
information, running diagnostic tests, and other operations. Dur-
ing an active cycle (card reader equipped machines only), the
START pad may be pressed (with a card inserted) to add time to a
cycle.
Control Identification
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
9 Part No. D515810ENR3