© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Troubleshooting
F232204R5
64
17. Troubleshooting and Cleaning the Coin Drop
When a coin is placed into coin slot, the coin should
roll down drop and be heard dropping into coin vault.
If coin does not fall into coin vault or if coin drop
sensor does not register that coin has been entered,
follow troubleshooting instructions below.
Troubleshooting Coin Drop
Is proper electrical power supplied to coin drop?
Incorrect electrical connection may prevent coins from
registering in coin drop. Refer to wiring diagram and
service manual for proper connections.
Is machine level? Machines that are not level may
prevent coins from following through required check
stages of drop. Refer to Installation Instructions for
instructions on leveling machine.
Is coin drop clean? Residue or lint build-up may
prevent coins from following through required check
stages of drop. Refer to
Cleaning Coin Drop
instructions below.
IMPORTANT: Never use oil to correct coin drop
problems. Oil residue will prevent coins from
rolling properly.
IMPORTANT: Do not bend or damage mechanical
parts within coin drop.
Cleaning Coin Drop
The electronic coin drop should be cleaned once a
year. Clean the drop more often if it is exposed to high
levels of residue or lint build-up. Follow the
instructions below for cleaning the coin drop.
Coin Drops with Old-Style Spring
Refer to
.
1. Disconnect electrical power to machine and drop.
2. Remove coin drop from machine.
3. Open cover of coin drop.
a. Move spring downward until cover catch is
free. Refer to
.
NOTE: Do not lift or overbend the spring in any
direction.
b.
O
pen cover for coin drop. Refer to
DRY2088N
1
Spring
2
Catch
Figure 1
DRY2089N
1
Cover
Figure 2
1
2
1
www.groupdynamics-laundry.com
