16
800793
Section 3 Troubleshooting
To reduce the risk of electric shock, fire, explosion, serious injury or death:
• Disconnect electric power to the washer before servicing.
• Never start the washer with any guards/panels removed.
• Whenever ground wires are removed during servicing, these ground wires must be
reconnected to ensure that the washer is properly grounded.
W003
WARNING
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
4. WASHER WILL NOT START (Control Board)
NOTE: If power is disconnected and reconnected, timer knob must be pulled out to energize washer electrical
system.
Washer Will Not Start.
(No Door Lock Only)
Is
There Voltage
Across "FS-5”
to "FS-2"
on Control
Board?
Is
There Voltage
Across "H4-1"
to "FS-2"
on Control
Board?
Is
There Voltage
Across "TS"
to "FS-2"
on Control
Board?
YES
YES
YES
NO
NO
NO
H035SE3B
Correct Wiring
Between Relay "CR1"
and Control Board.
Correct Wiring
Between Timer and
Control Board.
Correct Wiring
Between Timer
and Control Board.
Refer to Door
Lock Switch Analysis.
(Paragraph 2)
(1) "AC"
(2) "AC"
(3) "AC"
