Alliance Laundry Systems HTE517, Programming Manual

Page: 61 / 79

800000
59
32. Set Real Time Clock Date “CdE”
This option allows the user to set the Electronic
Control’s internal clock to the correct day of the
month.
How to Program the Clock Date
1. Control must be in Special Mode. Refer to Section
VII.
2. While pressing and holding the PERM PRESS
keypad with one hand, press the COLD keypad
with the other hand. Programmable option number
one,
“SIg”
, will appear in the VFD. See Figure 97.
3. Press the DELICATES (+) pad or the COLD (–)
pad to scroll through the programmable options
until
“CdE”
appears in the VFD. See Figure 98.
4. When
“CdE”
appears in the VFD, press the PERM
PRESS pad. The current day of the month will
appear in the VFD.
5. Press the DELICATES (+) or the COLD (–) keypad
to increase or decrease the day of the month until
correct. See Figure 99.
6. Press the PERM PRESS (enter) keypad when the
correct day of the month appears in the VFD. The
next option,
“COn”
, will appear in the VFD.
NOTE: To program “COn” (Set Real Time Clock
Month), see option 33. To program other options,
refer to the appropriate section.
How to Exit Programming Feature
1. Be sure service door has been opened and closed.
Refer to Section VI.
2. Be sure the control shows a programmable option,
not a value.
3. While pressing and holding the PERM PRESS
keypad with one hand, press the COLD keypad
with the other hand. The control will revert back to
the default mode. See Figure 2.
Figure 97
Figure 98
WASH RINSE SOAK
SPIN
PRICE TIME REMAINING
INSERT COINS UNBALANCE
C105IE1A
WASH RINSE SOAK
SPIN
PRICE TIME REMAINING
INSERT COINS UNBALANCE
C134IE1A
Figure 99
NORMAL
HOT
DELICATES
COLD
PERM
PRESS
WARM
Press this pad (enter)
to choose a selected
value or option
Press this pad (+)
to scroll forward or
increase a value
Press this pad (-)
to scroll back or
decrease a value
C106IE1A