Alliance Laundry Systems CHD25E2-CT025E, Programming Manual

Page: 46 / 55

To enter, press the Start keypad. The display will show
C HHH
,
with
HHH
the number corresponding to the machine capacity. Re-
fer to Table 8 .
Value Description
2 25, 30 Pound Tumble Dryer
4 30, 45 Pound Stack Tumble Dryer
5 35 and 55 Pound Tumble Dryer
12 50, 75, F75, 120, 170 and 200 Pound Tumble
Dryer
Table 8
To exit Machine Configuration Display #2 Test, press the Back
keypad. The control will return to the testing mode.
Machine Configuration Display #3 Test
This option shows the machine configuration values for the ma-
chine capacity.
To start test, control must be in the Testing Mode. Refer to How
to Enter Testing Feature at the beginning of this section.
To enter, press the Start keypad. The display will show
d HHH
,
with
HHH
representing the machine capacity. Refer to Table 9 .
To exit Machine Configuration Display #3 Test, press the Back
keypad. The control will return to the testing mode.
Value Description
0 Tumble Dryer
17 25 Pound Tumble Dryer
18 30 Pound Tumble Dryer
19 30 Pound Stack Tumble Dryer
20 30 Pound Stack Tumble Dryer – Lower
Pocket
21 30 Pound Stack Tumble Dryer – Upper
Pocket
22 35 Pound Tumble Dryer
23 45 Pound Stack Tumble Dryer
24 45 Pound Stack Tumble Dryer – Lower
Pocket
Table 9 continues...
Value Description
25 45 Pound Stack Tumble Dryer – Upper
Pocket
26 50 Pound Tumble Dryer
27 55 Pound Tumble Dryer
28 75, F75 Pound Tumble Dryer
29 120 Pound Tumble Dryer
30 170 Pound Tumble Dryer
31 200 Pound Tumble Dryer
Table 9
Airflow Switch Test
This option shows the current state of the airflow switch.
To start test, control must be in the Testing Mode. Refer to How
to Enter Testing Feature at the beginning of this section.
To enter, press the Start keypad. The display will show
AF OP
or
AF CL
, with
AF OP
being open and
AF CL
being closed.
Switch has to be closed for at least one second or open for at least
one second for a valid change.
To exit Airflow Switch Test, press the Back keypad. The control
will return to the testing mode.
Fan Motor Test
This option shows the fan motor running.
To start test, control must be in the Testing Mode. Refer to How
to Enter Testing Feature at the beginning of this section.
To enter, press the Start keypad. The display will show
FAn
to
indicate the fan motor is going to run.
The test must run for at least six seconds before it can be exited
and off for six seconds before the test can be run again.
NOTE: This test does not count towards the total ma-
chine run time operation.
To exit Fan Motor Test, press the Back keypad. The control will
return to the testing mode.
Damper Motor Test
This option shows the damper motor running.
To start test, control must be in the Testing Mode. Refer to How
to Enter Testing Feature at the beginning of this section.
Testing Machine and Electronic Control Functions
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
46 Part No. 70444901ENR10