Testing Machine and Electronic Control Func-
tions
This feature allows the owner to run diagnostic tests on various
tumble dryer operations without servicing the tumble dryer. The
tests that are available are shown in
For an overview of the manual diagnostic test feature, refer to the
flowchart.
How to Enter Testing Feature
1.
.
2.
Press the Up or the Down keypad until
diAg
appears.
3.
Press the Start keypad. Display will change to
dSoft
indicat-
ing the control software version number test.
4.
Press the Up or the Down keypad to scroll through the diag-
nostic test options.
How to Start Tests
To start a diagnostic test, refer to the quick reference chart below
(
). Press the Start keypad when the desired test is dis-
played. For detailed information on each test, read the appropri-
ate description.
How to Exit Testing Feature
Press the Back keypad. The display will return to Idle Mode.
Diagnostic (Testing) Mode – Quick Reference Chart
Test Number
Diagnostic Mode
dSoft
Control Software Version
ddoor
Loading Door Status
dLint
Lint Door Status
dHEAt
Heater Interlock Test
FCOnHH
Fan Motor Contactor Status (
HH
represents input status, open
OP
or closed
CL
)
FnCSHH
Fan Motor Centrifugal Switch Status (
HH
represents input status, open
OP
or closed
CL
)
CAb HH
Cabinet High Limit Thermostat Status (
HH
represents input status, open
OP
or closed
CL
)
SL HH
Stove High Limit Thermostat 1 Status (
HH
represents input status, open
OP
or closed
CL
)
SL2 HH
Stove High Limit Thermostat 2 Status (
HH
represents input status, open
OP
or closed
CL
)
ddiP
DIP Switch Status
diCnAL
ICM Alarm Status
diCnrS
ICM Reset Test
dEALrn
External Alarm Test
ddryon
Dryer On Temperature Test
dtHEr
Thermistor Temperature Test
dConF2
Machine Config #2 Display
Table 6
continues...
Testing Machine and Electronic Control Functions
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
41
Part No. 70444901ENR10
Summary of Contents for CHD25E2-CT025E
Page 2: ......
