Collecting Audit Information
This feature allows the owner to retrieve audit information stored
in the tumble dryer by pressing a sequence of pads on the control.
For an explanation of the audit options available, refer to
.
How to Enter Audit Feature
1.
Control must be in Manual Mode to start. Refer to
.
2.
Press the Up or the Down keypad until
Audit
appears.
3.
Press the Start keypad.
CyCLE
will appear.
If the procedure did not work, the control will return to the Idle
Mode.
How to Read Audit Data
1.
Use the Up or the Down keypad to scroll through various op-
tions until the desired option is shown in the display. Refer to
for an explanation of the audit options available.
Audit Options List
Display
Description
CyCLE
Total # of machine cycles
totHrS
Total # of run hours
HEAtHr
Total # of heat hours
rA CyC
Total # of rapid advance cycles
Ab CyC
Total # of aborted cycles
AntiCt
Total # of times anti-wrinkle exceeded
End2OP
Average time from end of cycle to door
open (last 25 cycles)
End25t
Average time from end of cycle to run
mode (last 25 cycles)
Table 5
2.
Once the desired option appears in the display, press the Start
keypad
once
to start the audit count.
3.
Press the Start keypad again. The control will go to the next
audit option in the Audit Options List.
4.
To select other audit options, repeat steps 1 – 3.
How to Exit Audit Feature
Press the Back keypad until the control returns to Idle Mode.
Collecting Audit Information
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
38
Part No. 70444901ENR10
Summary of Contents for CHD25E2-CT025E
Page 2: ......
