© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
802714R4
4
Before You Start
Supplies
For most installations, the basic supplies you will need
are:
Figure 1
Parts Included
An accessories bag has been shipped inside your unit.
It includes:
•
Installation Instructions
•
Two User’s Guide (one for washer and one for
dryer)
•
Warranty Bond
•
Three screws (electric dryers only). Refer to
Connecting Power Cord
sections in Step 5 of
Installation.
•
Two fill hoses with washers and filter screens.
Refer to Step 2 of
Installation
.
•
Four rubber feet. Refer to Step 7 of
Installation
.
•
Beaded strap. Refer to Step 3 of
Installation
.
NOTE: If the unit is delivered on a cold day (below
freezing), or is stored in an unheated room or area
during the cold months, do not attempt to operate
it until the unit has had a chance to warm up.
NOTE: Some moisture in the wash drum is normal.
Water is used during testing at the manufacturer.
Installation
Step 1: Position Unit Near Installation
Area
Move unit as close to the desired area of installation as
possible.
NOTE: For best performance and to minimize
vibration or movement, install washer on a solid,
sturdy and level floor. Some floors may need to be
reinforced, especially on a second floor or over a
basement. Do not install the washer on carpeting,
soft tile, a platform or other weakly supported
structures.
DRY2023N
1
Safety Glasses
2
Wood Block
3
Power Cord (Electric Models)
4
Wrench
5
Screwdriver
6
Level
7
5/16 Inch Socket Wrench
8
Duct Tape
9
Teflon Tape (Gas Models)
9/1
6
"
1
2
3
7
6
5
4
8
9
Any disassembly requiring the use of
tools must be performed by a suitably
qualified service person.
W299
WARNING
Washer and dryer are not designed to be
operated as separated, side-by-side units.
W187
WARNING
