11
800797
Moving Washer to a New Location
To prevent damage while moving the washer, the
shipping materials MUST be reinstalled.
Reinstallation of Shipping Materials
Disconnect washer from electrical supply.
Remove front access panel by removing two screws.
Place the shock sleeves on all four shock absorbers.
See illustration.
Insert hooked end of shipping brace into the open slot
of the motor mount. Attach with bolts and washers.
See illustration.
Reinstall front access panel.
Refer to
Installing the Washer
section for proper
procedures whenever the washer is moved and is ready
for installation.
H027IE1A
HOOKED
END OF
SHIPPING
BRACE
BOLTS
SHOCK SLEEVES
MOTOR
MOUNT
Summary of Contents for 800797
