5
2
Plug the power cord into the cable socket located at the end of
the data-power cable.
3
Plug the adapter into a power outlet. The icon of the battery
level indicates that the battery pack is in charge (the level bars
flash inside the icon) and gives the battery charge level.
4
The icon of the battery level will be
when charging has
finished. Charging takes approx. 3 hours.
Remove the power cord.
Unplug the adapter from the power outlet, and remove the
data-power cable inserted in the reader.
Power on instructions
Press the
green
button on the reader handle to power on the reader. The main screen will
appear on the display:
Item Feature
Description of use
1
Battery level
The battery level shows the fully charged level as well as the
charge level during the charge mode.
2
USB connection Appears when the reader is connected to a computer via USB port.
NOTE: The reading mode is disabled if there is no battery and no
external power supply. Therefore it is not possible to read a
transponder although the other functions are fully active.
3
Current number
of ID codes
Number of read and saved ID codes in the current session.
4
Clock
Clock time in 24 hour mode.
