24
Connect the wand to the PC via the serial cable and computer serial port.
Start the Configurator© software and turn on the reader. The reader’s current settings
will appear on the screen. If they don’t, click on “Get Settings”.
•
The Configurator© has several TABS across the top section.
•
Select the “Wireless Technologies” screen by clicking on the “Wireless
Technologies” Tab.
•
The Stick Reader settings must be set to the following:
o
Power Module: ON
o
Connection Mode: MASTER
o
Device Pairing: ON
o
Pairing Slave ID; use the address code found on the small label on the
Bluetooth® Adapter that attaches to the scale head. The code will
usually look something like this:
000BCE0076A3
Summary of Contents for RS320
Page 1: ...EID_UM_07M1 1_EN The Allflex RS320 Stick Reader User Manual ...
Page 31: ...31 NOTES ...
Page 43: ...43 ...