Allflex NX Series Operational Manual
Page
8
of
14
4.0
CONNECTIONS
There are two type of reader connection configurations, NX-M and NX-R.
1.
NX-M Master Reader shown below as a NX-M01CA
2.
NX-R Slave Reader shown as a NX-R01CA
Note: There are several variants of the NX-M and NX-R which have different connector
configurations
.
NX-M01CA
USB Stick USB PC I/O Serial R-NET 12vdc Power Antenna
•
USB Stick – Is used for downloading tags from reader and doing software updates.
•
USB PC - Is a USB connection to a PC. Can be used to communicate with Tag Manager.
•
I/O - Input and Output. Use for controlling external devices. Refer later in manual.
•
Serial - Has 2 x RS-232 communication ports.
•
R-Net – Is used to connect other slave readers.
•
12vdc Power - Is the supply to the reader. Can be 12vdc -14vdc.
•
Antenna – Connection to Antenna.
NX-R01CA
R-Net In R-NET Out 12vdc Power Antenna
•
R-Net In – Is used to connect to the Master Reader NX-M.
•
R-Net – Is used to connect other slave readers.
•
12vdc Power - Is the supply to the reader. Can be 12vdc -14vdc.
•
Antenna – Connection to Antenna.
