Allevi Allevi 1, User Manual

Page: 14 / 21

14
3.
This will bring you to your printer Status section. Here you can get an overview of your print
settings. We recommend always autocalibrating first. Always autocalibrate with a syringe
and needle loaded in the printhead. Do NOT autocalibrate with a dish on the bedplate.
4.
Using a preloaded syringe from your starter kit, attach a 30 gauge 0.25 ” (pink) needle to the
syringe, and load syringe into the CORE printhead. Twist the cap under the shoulder screws
to secure it.
a) To load syringes with Pluronic F127 or other materials, watch our instructional video
which is available on the Getting Started page.
NOTE: Bioinks may be loaded differently and use different needles depending on the type
of material. View our
General Bioink Parameters guide on Build With Life.