8
350
9
maintenance
1.
4.
3.
2.
troublesHootinG
Before contacting our customer service department, please try the following solutions:
PRoBlEm
REaSon
SoluTIon
unit won’t operate.
1. ON/OFF button hasn’t
1. Press ON/OFF button.
been pressed.
2. Unit is unplugged.
2. Plug in unit.
3. The inlet grill has not been
3. Check to ensure
installed or put back in place
filters are properly
properly.
installed & the inlet grill
is installed & locked into
place. (See instructions
on pg. 8).
Reduced air flow or
1. The inlet or outlet grill may
1. Ensure nothing is in
poor filtering.
be blocked.
front of or on top of the
purifier.
2. The HEPA filter may be clogged.
2. Check filter and
replace it if necessary.
(See instructions on pg. 8).
The Allergy Pro™ professional air purifier
is almost maintenance free! Our true
HEPA filter lasts up to twelve months,
depending on use and environment
conditions. It is recommended to replace
the true HEPA filter every twelve months.
Before replacing the true HEPA filter of
your Allergy Pro
™
professional air purifier,
turn off and unplug the unit from the
electrical outlet and read all safety
instructions and important warnings in
this owner’s manual.
REPlaCIng ThE TRuE
hEPa FIlTER
1. Make sure unit is turned off and
unplugged. With the front of the unit
facing forward, pull the lid towards
you at the upper end of the inlet grill
as shown and remove the front grill.
2. Remove the true HEPA filter by lifting
and pulling the string on both sides of
the filter.
3 . Insert a new true HEPA filter, then
insert the bottom of the inlet grill first
and then snap the upper part of the
inlet grill back into position.
4 . To close the front grill, first make
sure the bottom hooks are properly
in place before snapping it up to its
upright and locked position.
To oRdER a REPlaCEmEnT
TRuE hEPa FIlTER
The true HEPA filter should be changed
every six months, simply contact our
customer service department
at
1.800.875.8577
.
The Allergy Pro™ replacement true HEPA
filter part number is:
TPP350Fa
