AllerAir
·
1.888.852.8247 · [email protected]
4
Operating and Maintenance Manual
FILTER ASSEMBLY - A D
D models have a 3" deep carbon filter.
STEP 7
Place lid back to its proper
position by aligning the arrow
with the rear seam.
STEP 8
Replace the four screws.
STEP 9
Turn the unit back onto its
wheels. It is now ready for
immediate use.
STEP 4
Remove
only one
of the white,
donut-shaped gaskets from
the inside of the purifier body.
STEP 5
Insert the carbon filter.
STEP 6
Replace the gasket that had
been removed in STEP 4.
STEP 3
Gently grasp wheels. Remove the
base by pulling gently on the wheels.
STEP 1
Turn power off and
unplug
from receptacle.
Lay unit upside down.
STEP 2
With a #2 Philips screwdriver,
remove the four screws from the
bottom of the unit.
DO NOT ALLOW ANY OBJECT TO BE STUCK OR POKED INTO ANY OPENING OF THE UNIT.
NEVER SERVICE THE UNIT BEFORE TURNING UNIT OFF AND REMOVING ELECTRICAL PLUG
FROM THE WALL RECEPTACLE.
WARNING!