AllerAir AirMedic+ Series, Operation And Maintenance Manual, Page: 2 / 8

AllerAir
·
1.888.852.8247 · info@allerair.com
2
Operating and Maintenance Manual
BEFORE REMOVING THE TOP OR BOTTOM OF THE UNIT FOR ANY REASON, ALWAYS
UNPLUG THE CORD FROM THE POWER SUPPLY.
WARNING!
GETTING STARTED

If supplied for a 120V system, plug into a 120V - 15 Amp outlet. If supplied for a 230V system -
plug into a 230V outlet.

For best results situate your unit close to your sitting, sleeping or work area.
 We recommend running your unit on low, unless in a high dust environment. The low setting also
provides the most efficient odor filtration.
AIRMEDIC MAINTENANCE
The HEPA Filter
 Change the HEPA filter every 3 - 5 years or after a noticeable decrease in air quality.
The Pre-Filter

Change or vacuum the pre-filter every 2 - 4 months depending on the dust level in the area of use.
The Carbon Filter
 Change the carbon filter after 2 years or after a noticeable decrease in air quality.
REPLACEMENT PARTS
Models Pre-filters Notes
N6FMPW001 White pre-filter Packs of 4
N6FMPB002 Black pre-filter Packs of 4
N6FH0411 HEPA filter 1 filter
A5FMR002 Mircro particulate filter Pack of 1
AM000911 Bulk Exec carbon mix 44 lb. box
AM000912 Bulk Vocarb carbon mix 44 lb. box
CMEL0046 Switch 1
A4EL0045 8'-6" black cord 1
A4EL9008 Control knob 1
Note: White and sandstone units
have white pre-filters, black units
have black pre-filters.