allen WB1824, Manual, Page: 22 / 56

SECTION 2
ASSEMBLY
068522 Page 22
Assembly Instructions
Installing Pneumatic Wheel Type Bracket:
1. Loosen clip and slide adjustable end frame bracket around workbridge
section, and tighten clips back to secure end frame bracket.
2. Loosen square head bolts on end from bracket for wheel slide assembly,
3. Slide wheel slide assembly through end frame bracket and tighten when at
desired length.
4. Remove cotter pin and flat washer from wheel assembly.
5. Slide wheel assembly into tubes as shown and preplace washer and cotter
pin to secure. Do this for both wheels.
Assembly Dire
ction
Adjustable End Frame Bracket
Pneumatic Tire Assembly
Paving Style Wheel Slide Assembly
Workbridge Section