allen WB1824, Manual, Page: 21 / 56

068522 Page 21
SECTION 2
ASSEMBLY
Assembly Instructions
Please follow the instuructions below for assembly:
Work Bridge Section Connections:
1. Align WB sections so that the connecting clevis sits outside the rod end.
2. Insert clevis pin through connecting clevis, also passing through the rod
end.
3. Insert hairpin into hole on clevis pin, locking the clevis pin in place.
4. Do this for both sides of the WB section.
5. Insert connecting pin into square tubing of WB section.
6. Place bolt through hole provided in mainframe, making sure that bolt also
passes through the connecting pin.
7. Place nut on bolt and tighten.
8. Align opposite section so that the bolt hole on the mainframe aligns with
the additional hole in the connecting pin.
9. Once aligned, insert bolt, attach nut and tighten.
Clevis Pin
Bolt
Connecting Pin
Hairpin
Connecting Clevis
Rod End