manualshive.com logo in svg

allen RS844, Operations & Parts Manual, Page: 51 / 130

Share
Download
allen RS844 Operations & Parts Manual Download Page 51

057625 - 10/2012

SECTION 4

PARTS

Page 4-3

Replacement Parts Procedures

We recommend AEC quality replacement parts, available from the AEC Customer Service Department 

or your nearest AEC Dealer.

Part numbers are subject to change without notice. Part numbers might be different outside of the 

United States of America. Use part numbers listed in the applicable parts list table  when you place your 

order. If a part number changes,  the AEC Customer Service Department or your nearest AEC dealer 

will have the latest part number for the replacement part.

Remember when you order replacement parts, you will need your model number and serial number. 

These are the numbers that you have recorded in the UNIT ID section of this manual. Please order 

replacement parts by the appropriate part number, not the key number.

This manual contains an illustrated parts list for help in ordering replacement parts for your machine. 

Follow the instructions below when ordering parts to insure prompt and accurate delivery:

1. 

All orders for service parts - include the serial number for the machine. Shipment

 

will be delayed if this information is not available.

2.  

Include correct description and part number from the “PARTS” Section 4.

3.  

Specify exact shipping instructions, including the preferred routing and complete destination

 address.

4. 

DO NOT return parts to AEC without receiving written authorization from AEC. All authorized    

 

returns must be shipped pre-paid.

5. 

When placing an order, please contact the AEC Dealer nearest you.

All information, specifications, and illustrations in this manual

are subject to change without notice and are based

on the latest information at the time of publication.

 

                                                                                                                                                                                                                                       

Summary of Contents for RS844



































































































































Reviews:

No comments