allen HDX750 Operations & Parts Manual Download Page 51 | Manualshive

Page: 51 / 82

background image

4-3

056335; 01/12

SECTION 4

PARTS

Replacement Parts Procedures

We recommend Allen quality replacement parts, available from the AEC Customer Service
Department or your nearest AEC Dealer.

Part numbers are subject to change without notice. Part numbers might be different outside
of the United States of America. Use part numbers listed in the applicable parts list table
when you place your order. If a part number changes, the AEC Customer Service Department
or your nearest AEC dealer will have the latest part number for the replacement part.

Remember when you order replacement parts, you will need your model number and serial
number. These are the numbers that you have recorded in the UNIT ID section of this man-
ual. Please order replacement parts by the appropriate part number, not the key number.

This manual contains an illustrated parts list for help in ordering replacement parts for your
machine. Follow the instructions below when ordering parts to insure prompt and accurate
delivery:

1.

All orders for service parts - include the serial number for the machine. Shipment
will be delayed if this information is not available.

2.

Include correct description and part number from the “PARTS” Section 4.

3.

Specify exact shipping instructions, including the preferred routing and complete
destination address.

4.

DO NOT

return parts to AEC without receiving written authorization from AEC. All

authorized returns must be shipped pre-paid.

5.

When placing an order, please contact the AEC Dealer nearest you.

All information, specifications, and illustrations in this manual

are subject to change without notice and are based

on the latest information at the time of publication.

«
...
49
50
51
52
53
...
»

Summary of Contents for HDX750



















































































Reviews:

No comments

Related manuals for HDX750

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands