manualshive.com logo in svg

allen HDX605, Safety & Operation Manual, Page: 4 / 62

Share
Download
allen HDX605 Safety & Operation Manual Download Page 4

068356

Page 4

GENERAL

INFORMATION

Sect No. 

Title 

Page

- 

General Information

 

Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

 

Information Contained in This Manual  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

 

CE Declaration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

 

Sound & Vibration Testing  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

 

Dealer Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

 

Ordering Parts  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

 

Model Number - Serial Number Codes   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

 

Unit Identification   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

 

Technical Specifications  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

 

Machine Dimension Specifications   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

 

Engine Specifications   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

 

Engine Parts  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

1.0 Safety  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

 

Federal / State Warning Regulations  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

 

Manual Tag Safety Detail. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  21

 

Spark Arrestor Notice   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

 

Operating Safety  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

 

Engine Safety   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

 

Service Safety  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

 

Lifting Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

 

Transportation Safety   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

 

Pan Installation Safety - Lifting Bridle  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

 

Pan Installation Safety - Lifting Jacks  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Table of Contents

Summary of Contents for HDX605































































Reviews:

No comments