allen HDX605, Safety & Operation Manual, Page: 33 / 62

Start-up Procedure
Before Starting Procedures
Before starting the riding trowel check for the following:
1. Oil level in engine.
2.
Oil level in riding trowel gearboxes.
3. Fuel level in fuel tank.
4. Condition of air filter on engine.
5. Condition of riding trowel arms and blades.
6. Verify that daily maintenance of grease points have been performed.
Starting Procedures
Turn ignition switch key to the start-position, immediately release key when engine starts. Allow engine to
warm up for 5 minutes before operating riding trowel.
Operating the starter for more than 5 seconds can damage the starter or
engine. If engine fails to start release the switch and wait 15 seconds before
operating starter again.
SECTION 2
OPERATIONS
068356 Page 33