background image

 

- 1 -

IMPORTANT SAFETY INSTRUCTIONS: 

 

 

When using electrical appliances, basic precautions should always be followed to reduce the risk of 
fire, electric shock and injury to persons including the following: 

1.  Read all instructions before using this appliance. 
2.  This appliance is hot when in use. To avoid burns, don’t let bare skin touch hot surfaces. The grill at the 

bottom of this heater in particular will become hot when the heater is active. Keep combustible materials 
such as furniture, pillows, bedding, papers, clothes and curtains etc. At least 3 feet(

 

0.9m)away from the front 

of the appliance. Keep all items away from the sides and back of the appliance and take special care not to 
block the air intake or exhaust vents. Use handles when moving this heater.

                                                                                       

 

3.  Extreme caution is necessary when the appliance is used by or near children or invalids and whenever the 

heater is left operating and unattended. 

4.  Do not operate the appliance if the power cord or plug has been damaged or the heater has been damaged 

or malfunctioned in any way. Take the appliance to authorized service facility for examination, electrical or 
mechanical adjustment or repair. 

5.  Do not use outdoors. 
6.  Do not use the appliance in bathrooms, laundry areas and similar indoor locations, Never locate the 

appliance where it may fall into a bathtub or other water container. 

7.  Do not run the power cord under carpeting. Do not cover cord with throw rugs, runners, or similar coverings. 

Do not route cord under furniture or appliances. Take care to position the cord away from high traffic areas 
and such that it can not be tripped over. 

8.  To disconnect the appliance, turn all controls “OFF”, then remove the plug from the outlet. 
9.  This appliance has a polarized plug(one blade is wider than the other). This plug will fit in a fully in a outlet 

only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does fit, contact a qualified 
electrician to install the proper outlet. Do not change the plug in any way 

10.  Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an 

electric shock or fire, or damage the appliance. 

11.  To prevent a possible fire, do not block air intakes or exhaust in any manner. Do not use on soft surfaces like 

a bed, where openings may become blocked. 

12.  A heater has hot and arcing or sparking parts inside. Do not use in areas where gasoline, paint or flammable 

liquids are used or stored.   

13.  Use this heater only as described in this manual. Any other use not recommended by the manufacturer may 

cause fire, electric shock or injury to persons. 

14.  Always plug heaters directly into a wall outlet/receptacle. Never use with an extension cord or relocatable 

power tap. 

15.  Do not attempt burn wood or other materials in this heater 
16.  When transporting or storing the heater, take care to keep both the unit and power cord/plug dry, free from 

excessive vibration and away from heat sources.   

17.  This appliance comes equipped with an overheat protection safety device. Should the appliance begin to 

overheat for any reason, it will automatically turn all heater functions of the appliance off. The appliance will 
have to be reset prior to continuing use. To reset the overheat protection safety device, turn all controls, plug 
the appliance back and turn on 

 
 
 
 

SAVE THESE INSTRUCTIONS FOR FUTURE USE 

--------------------------------------------------------------------------------------- 

 

 

 

Warning: Any use of this appliance other than recommended by the manufacturer in these users 
manual may cause fire, burns, electric shock and /or other serious injuries 

Summary of Contents for EA0045RC









Reviews: