allen 053370, Operations & Parts Manual

Page: 32 / 103

1-14
SECTION 1
SAFETY
053423; 09/16
1.7
Pan Installation Instructions
Use a lifting sling (bridle) with a capacity of at least a 2:1 weight ratio
for the equipment being hoisted.
STEP 1: Attach the lifting bridle to the machine at all four lifting points. (A)
STEP 2: Slowly lift machine in a safe manner to a height that is required to
safely install the pans. This is typically 6-8” above floor level.
This section details the proper technique to utilize the lifting bridle system and the dolly jack
system in a safe manner to install pans.
(NOTE: Images are for illustration purposes only)
A
STEP 3: Carefully slide the pans under the machine making sure that you
are aware of the corners on the blades that are sharp. (B)
STEP 4: Align the pans so that the clips will not be crushed when the
machine is lowered back down.
STEP 5: Slowly lower the machine down onto the pans while maintaining a
visual so the blades are going into the proper gaps. (Typically the pans can
only be intalled one way)
B
STEP 6: Remove lifting bridle from the
machine.
STEP 7: Start machine and slowly increase
the throttle until the blades slowly begin turn-
ing and engaging the pans. The machine is
now ready to finish concrete utilizing the pans.