INSTRUCTIONAL
OWNER’S MANUAL
12
Next, take the jogger wheel and insert into the bearing on the bottom side of the front receiver block.
Push the axle through the bearing until the wheel assembly contacts the receiver block. There will be
and audible “click” to indicate the wheel is securely locked in place.
After the wheel is assembled, give the wheel a good tug to make sure it is securely locked. If not properly
fixed, the wheel may come lose and risk injury to you or your child..
The swivel wheel assembly has a locking pin to enable the wheel t be secured for jogging. The small
knob under the fork crown can be pulled out and twisted counter-clockwise to allow for swivel function.
To lock the wheel, turn the small knob clockwise to release, and then allow the wheel to rotate until the
lock pin snaps in place.
To install the jogger kit, first remove the hitch arm by releasing opening and releasing the QR pin, then
pull out the arm.
INSTALLING THE JOGGER KIT
STEP 1:
STEP 2:
STEP 3:
NOTE:
To remove the jogger wheel, simply push the red button on the rear of the connecting block, and pull the
wheel out.
STEP 4:
