INSTRUCTIONAL
OWNER’S MANUAL
4
TOW ARM
WARNING!:
Check this pin periodically during and before each use to be sure it has not
become loose. Failure to do so could result in serious injury to you or your child.
STEP 1:
STEP 2:
STEP 3:
STEP 4:
Insert the hitch arm in the bracket on the frame as shown.
Slide the hitch arm all the way through
the center receiver block, aligning the
pins with the slots in the receiver, Locate
the quick release pin, found on the trailer
frame, then Insert the pin through the
hole in the tow arm. The pin should go
completely through the tow arm and
bracket.
Once the pin is through, flip the safety
clasp over and onto the pin. Give the pin
a tug to be sure it is secure.
FIGURE 8
Locate the hitch arm, and position to insert in the center connector of the trailer, as shown. The hitch arm
is held in place by a quick release pin.
Your Allen Sports trailer uses simple and convenient push button quick-release wheels.
STEP 1:
STEP 2:
STEP 3:
To install the wheel, first push the button on the outside of the wheel hub,
and insert the axle through the hanger bracket on the frame as shown.
Push all the way in and release the pushbutton. The wheel is automatically
locked in place.
Give each wheel a tug to make sure they are secure.
WHEEL INSTALLATION
WHEEL REMOVAL
FIGURE 7
WARNING!:
Check the wheels periodically during and before each use to be sure they have not become
loose. Failure to do so could result in serious injury to you or your child.
To remove wheels for folding or storage, simply depress
and hold the “Push” button in the center of the wheel
hub, and pull the wheel out of the frame.
