8
•
To remove the jogger kit, first take off the brake lever by loosening and removing
the hand knob (#16) on the lever bracket (#17).
•
Then release the brake, remove the front wheel,
•
Remove the two screws from one side of the cross support tube.(#7)
•
Finally, remove the QR pins(#18) from the aluminum frame brackets (#19),
depress the spring pin (#20), and pull out the arms.
,
Maintenance
We recommend that you have an experienced mechanic perform the following checks
and lubricate required areas once a year.
•
All pivot points -
Lubricate and check fasteners, such as nuts and bolts.
•
Wheel Axles -
Lubricate, adjust and check for signs of wear
•
Folding mechanism -
Lubricate, adjust and check for signs of wear
•
Handbrake -
Lubricate pivot point, adjust and check for signs of wear.
•
Tires -
Check tires regularly for proper inflation. Inflate to 20-30 PSI range.
Lower pressures give a softer ride. Always use a hand or foot pump to inflate
tires.
•
To maintain the safety and performance of your jogger kit, use only original
equipment replacement parts available from the service center or your retailer.
Use of non-approved replacement parts and accessories will void
manufacturer’s warranty.
WARRANTY INFORMATION:
ALLEN SPORTS USA
If your product requires warranty service, do not return it to retail location where it was purchased. Contact:
(800) 722-5536 ~
Please note that all returns and exchanges are subject to the return policy of the retailer
where the product was originally purchased
R. A. ALLEN CO., INC. - 505 BEACHLAND BLVD. - STE. 5 - VERO BEACH, FL 32963
#19
#20
#18
