5
ASSEMBLY INSTRUCTIONS
Lowes.com/allenandroth
Canopy Chain
Loop
Canopy
Lock Ring
5
4. Pull the fixture wires and ground wire up through
the fixture chain (B), alternating links.
Unthread the canopy lock ring preassembled to
crossbar assembly (A) and slide it and the
canopy (D) down the fixture chain (B). Push all
slack fixture wire through canopy chain loop on
crossbar assembly (A) and into outlet box. Trim
excess fixture wire, leaving a minimum of 6 in.
hanging out of the outlet box.
4
B
Supply Wires
5.
Outlet Box
B
D
6
White Wire
From Outlet Box
Black Wire
From Outlet Box
Bare, or Green
Ground Wire
Bare, or Green
Fixture Ground Wire
From Outlet Box
Bare, or Green
Ground Wire
From Outlet Box
White or
Ribbed Side
From Fixture
From Fixture
Black or
Smooth Side
OR
BB
AA
Hardware Used
x 3
Wire
Connector
6. Attach ground fixture wire to either the green ground
screws preassembled on the crossbar assembly (A)
or to the ground wire in the outlet box (usually
GREEN or BARE). If attaching fixture ground wire to
the crossbar, it is imperative the outlet box in your
home be properly grounded. Connect the neutral
(WHITE or RIBBED) fixture wire to the neutral
(usually WHITE) wire from the outlet box. Connect
the hot (BLACK or SMOOTH) fixture wire to the hot
(usually BLACK) wire from the outlet box. Fasten
wires together with a wire connector (AA) and tightly
wrap wire connector (AA) with electrical tape (not
included).
Green Ground Screw
