INSTALLATION, VOICING, AND CARE OF THE ORGAN
INSTALLATION
Wherever your MDS-30 LDS organ may be situated, careful installation is a
prerequisite to successful results. Your Allen representative is well qualified to
guide you in planning for this.
Factory assistance in planning the installation is also available and may, in fact, be
sought by your representative, in order that optimal results may be achieved.
VOICING
The MDS-30 LDS organ enjoys unprecedented accuracy in the scaling and voicing
of each note of every stop. This musical breakthrough is an inherent part of the
engineering design of the instrument. Final adjustments in scaling and voicing
involve controls within the console and are best left to an expert. These
adjustments are normally a part of installation and, once done, should not require
changes, unless the instrument is moved to a new location.
Bass frequency projection is strongly affected by tone cabinet location. Although
none of the tone cabinets should be moved once the installation has been
completed, extra care should be exercised to prevent inadvertent movement of the
bass tone cabinets.
REVERBERATION
The Digital Reverberation System provides the spatial ambience of a large
reverberant auditorium. Although most effective in poor acoustic environments, it
even enhances the tones in an ideal acoustic setting.
The Reverb stop is not affected by the capture system.
Adjustment of reverberation can be accomplished by your service technician or
sales representative.
BATTERY BACKUP SYSTEM
